Chopin Mixolab, Maintenance Manual

Page: 87 / 144

Chapter 3 Repair 87
Maintenance manual
MM-MIXO-EN Ind. 0
04/2012
Mixolab
Presence of 230 Vac, first disconnect the mains supply.
1. Remove the left and right casings (see op. 1-1) .
Record the mounting order of the connectors on the CPU
board (they are numbered clockwise).
2. Unplug all connectors from the CPU board ( A ).
3. Undo the four attachment screws of the CPU board with an
Allen key
(B) , and remove the board.
4. Replace the CPU board, carefully re-plug all connectors while
respecting the previously recorder mounting order.
5. Reinstall the left and right Mixolab casings (see op. 1-1) .
6. proceed to the adjustments of the Mixolab:
- program update is necessary,
- bowl, dough and tank temperature measurements,
- torquemeter adjustment,
- pump calibration.
9 : Mixolab CPU board
Operation 9-1 Dismantling/installing the CPU board
Sheet: 1 / 1
Consumables:
Tools:
-
-
Electronic circuits sensitive to
electrostatic discharges. Use
precautions during handling
(antistatic floor, grounded wrist).
B
A