Chopin Mixolab, Maintenance Manual

Page: 107 / 144

Chapter 3 Repair 107
Maintenance manual
MM-MIXO-EN Ind. 0
04/2012
Mixolab
Note: In order to check the cooling circuit, the Mixolab must be con-
nected to a water valve and to a drained sink (see sketch
opposite).
1. Go to the maintenance menu of the Mixolab.
2. Click on the solenoid valve icon to activate the water cooling
circuit (
A ). The valve icon becomes green and a blue bar sym-
bolising the water supply appears ( B ).
3. Check the function of the draining hose ( C ) (water should
come out), this confirms that water circulates into the cooling
circuit.
4. Let the cooling circuit operate for 3 minutes, this allows to
detect any leakage very quickly.
Carefully observe the Mixolab, a leakage may appear ( D ): in
this case IMMEDIATELY SWITCH OFF the solenoid valve by
re-clicking on the icon.
5. If a leakage is confirmed, turn off the Mixolab and thoroughly
check the cooling circuit.
11 : Adjustments and checks for the Mixolab
Operation 11-6 Checking the cooling circuit
Sheet: 1 / 1
Consumables:
Tools:
-
-
IN
OUT
A B
C D