Chopin Mixolab, Maintenance Manual

Page: 41 / 144

Chapter 3 Repair 41
Maintenance manual
MM-MIXO-EN Ind. 0
04/2012
Mixolab
1. Remove the Mixolab’s left and right casings (see op. 1-1) .
2. Undo the two rear attachment screws of the central casing ( A ).
3. Unplug connector ( B ) of the 3-colour LED from the CPU board.
4. Undo the left and right attachment screws of the casing ( C ) on
the bowl.
5. Remove the water injection nozzle ( D ).
6. Remove the tube ball joint from the central casing ( E ), then
remove the tube.
7. Open the external cover ( F ), then turn up the cover deflector.
8. Undo the two attachment screws of the gas spring protecting
plate (
G ).
1 : Basic operations
Operation 1-2 Dismantling/installing the central casing
Sheet: 1 / 2
Consumables:
Tools:
Cable ties
-
A
B
D C
G
F
E