Chopin Mixolab, Maintenance Manual

Page: 62 / 144

62 Chapter 3 Repair
Maintenance manual
MM-MIXO-EN Ind. 0
04/2012
Mixolab
1. Remove the right casing (see op. 1-1) .
2. Remove the water injection nozzle ( A ).
3. Remove the tube ball joint from the central casing ( B ), then
remove the tube.
Note: Record the location of the hydraulic connection on the tank
(see schematic next page) .
4. Disconnect the earth terminal from the chassis ( C ).
5. Unplug all hydraulic connections on the tank.
6. Cut the cable ties of the electrical cables on the tank.
7. Unplug the connector of the double level detector on the CPU
board (
D ).
8. Unplug the connector of the tank heating resistors on the CPU
board (
E ).
9. Unplug the connector of the tank temperature sensor on the
CPU board (
F ).
4 : Hydraulic components
Operation 4-1 Dismantling/installing the equipped tank
Sheet: 1 / 2
Consumables:
Tools:
Cable ties
-
B
A
C
D
F
E