Chicago Dryer King Edge VAc, Instruction Manual

Page: 20 / 302

Installation King Edge Vac
2-2
2.1 Site and Utility
Requirements
Figure 2-1 shows the clearances required for
the spreader/feeder. The dimensions noted are the
minimums recommended for efficient production
and service, as well as maintenance access. It is
strongly recommended that enough clear space
be provided around the spreader/feeder to allow
for efficient access.
NOTE: The correct location of
the spreader/feeder is of extreme
importance.
The site must have a level, sturdy floor capable
of supporting the spreader/feeder’s weight without
significant flexing. For weight specifications
and other technical information refer to the
APPENDIX
,
Technical Specifications
.
No special foundation, floor grouting, or
installation of anchors is required. Generally,
the locking wheels will hold the spreader/feeder
in position and still allow for repositioning
when necessary. Floor grouting or installation
of anchors may be required to comply with local
codes or conditions, or aboard a ship.
Figure 2-1: Recommended clearances for installation of the King Edge.
36”
(915 mm)
36”
(915 mm)
72” (1830 mm)
TOC INDEX