Chicago Dryer King Edge VAc, Instruction Manual

Page: 155 / 302

King Edge Vac Repair
7-21
Remove the screws which secure the worn
bearings and remove them from the block.
Be sure to keep track of the spacer.
Use a clean cloth to wipe down the bearing
block and the spacers.
Carefully reposition the spacers (Figure
7-29).
Insert the new bearings, making sure not
to move the spacer out of position.
Secure with the screws removed in
Step 5.
Slide the linear bearing assembly block
back onto the upper spreader rail.
Place the rail back into position and secure
with the screws removed in Step 3.
Reattach the spreader clamp carrier as-
sembly, making sure that the longer bolt
goes into its original hole.
Lubricate the upper spreader rail. For more
information, refer to the PREVENTIVE
MAINTENANCE chapter, Daily PM
section,
Lubricate Upper Spreader Rail
procedure.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Figure 7-29: Make sure the spacer is in its proper
position before inserting the new
bearing.
TOC INDEX