Chicago Dryer King Edge VAc, Instruction Manual

Page: 187 / 302

King Edge Vac Repair
7-53
Inlet Transfer Rodless Air Cylinder
Service
Many of the following procedures will be
performed as a direct result of the weekly
preventive maintenance checks on this device:
Tighten the Drive T
Tighten the Drive Blocks
Tighten the Carriage Block
Increase the Air Cushion
Tighten the Inner Band
CAUTION
The following procedures are
critical to the performance
and service life of the inlet
transfer rodless air cylinder.
Perform these tasks if the
weekly PM checks indicate
the necessity!
•
•
•
•
•
Tighten the Drive T
Required Tools
small slotted screwdriver, stubby
Phillips screwdriver, wrench, metric
Allen wrench, Loctite
®
243 thread lock
Perform only when the unit is OFF
with power disconnected.
If necessary:
Turn power OFF at the main discon-
nect switch.
Turn OFF the compressed air supply
to the unit.
Make sure the compressed air system
is depressurized.
Raise the front access guard and secure
in position using the provided bracket
arms (Figure 7-69).
Remove the right Plexiglas guide (Figure
7-71) and place in a safe location.
1.
a)
b)
c)
d)
2.
Figure 7-71: Remove the right Plexiglas guide to
provide access to the drive T screws.
TOC INDEX