Chicago Dryer King Edge VAc, Instruction Manual

Page: 16 / 302

Introduction King Edge Vac
1-4
WARNING
Know the proper procedure
for locking out and tagging
equipment during repair
procedures.
Follow the rules of your work
site. Failure to do so could
result in serious injury.
Make sure the power
is disconnected before
servicing the unit.
Do not repair or correct any
condition without reading
and understanding the
REPAIR chapter.
Only qualified personnel
should troubleshoot and
repair this unit.
Safety Features
There are several general categories of safety
features:
Main Disconnect Switch
Safety Guards
Safety Interlock Switches
Safety STOP Buttons
Safety Labels
Safety Messages in the Manual
Main Disconnect Switch
The main disconnect switch is located on the
outside of the main electrical box. When turned
to OFF, this switch shuts off incoming electrical
power to the unit.
Unless otherwise indicated, turn the main
disconnect switch to OFF before performing any
maintenance or repair work.
For more information on operating the main
disconnect switch, refer to the INSTALLATION
chapter, Installation Procedures section,
Electrical Connection procedure.
Safety Guards
A front safety guard runs the entire length of
the unit’s working area and physically restricts
hands from coming into contact with moving
parts.
Both endframes and other appropriate areas
of the unit are covered with protective panels to
prevent fingers or hands from coming into contact
with moving parts. The guards and panels also
serve to keep foreign objects from entering the
unit and damaging components.
When a panel is removed or the front guard is
raised, all rotating parts stop moving.
•
•
•
•
•
•
TOC INDEX