9
9
9-30
9-30
Installation■>■Installation■Procedure■>■Adjusting■Image■Position■>■Margin■Adjustment■with■Multi■Purpose■Tray■(1st■side;■mechanical■adjustment)
Installation■>■Installation■Procedure■>■Adjusting■Image■Position■>■Margin■Adjustment■with■Multi■Purpose■Tray■(1st■side;■mechanical■adjustment)
■
■
Margin■Adjustment■(2nd■side)
1)■Make■2-sided■copy■from■cassette■1,■and■check■
that■the■left■margin■is■2.5■-/+■2.0mm.
L1
image
Feeding direction
of paper
F-9-53
2)■If■the■left■margin■is■out■of■the■specification,■change■the■adjustment■value■for■the■left■margin■on■the■2nd■side■in■cassettte■1.
COPIER■>■ADJUST■>■FEED-ADJ■>■ADJ-C1RE;■1■increment■of■the■value■reduces■the■left■margin■by■0.1mm
3)■As■for■the■adjustment■value■for■side■registration■on■the■2nd■side■in■cassette■2,■enter■the■same■value■as■the■adjustment■value■for■the■left■margin■on■the■
2nd■side■in■cassette■1.
COPIER■>■ADJUST■>■FEED-ADJ■>■ADJ-C2RE
4)■To■make■the■setting■value■effective,■turn■OFF/ON■the■main■power■of■the■Host■Machine.
5)■Make■2-sided■copy■from■cassette■2,■and■check■that■the■left■margin■is■2.5■-/+■2.0mm.
6)■If■the■margin■is■out■of■the■specification,■change■the■adjustment■value■for■the■left■margin■on■the■2nd■side■in■cassette■2.
COPIER■>■ADJUST■>■FEED-ADJ■>■ADJ-C2RE;■■1■increment■of■the■value■reduces■the■left■margin■by■0.1mm.
7)■Write■down■the■new■adjustment■value■on■the■service■label.
ADJ-C1RE
ADJ-C2RE
8)■Exit■from■Service■Mode.
■
■
Margin■Adjustment■with■Multi■Purpose■Tray■(1st■side;■mechanical■adjustment)
1)■Place■paper■on■the■Multi■Purpose■Tray.■See■
the■label■on■manual■feed■area■to■place■paper.
2)■Make■copy■from■the■Multi■Purpose■Tray,■and■
check■that■the■left■margin■is■2.5■-/+■1.5mm.
image
L1
Feeding direction
of paper
F-9-54
<In■the■case■that■the■left■margin■is■out■of■specification>
3)■Remove■paper■on■the■Multi■Purpose■Tray.
4)■Open■the■Multi■Purpose■Tray■in■the■condition■where■the■
Multi■Purpose■Tray■Sub■Cover■is■opened.
F-9-55