9
9
9-228
9-228
Installation■>■[TYPE-5]■2■Option■HDDs■(250GB)■+■HDD■Mirroring■Kit■or■HDD■Data■Encryption■&■Mirroring■Kit■>■Installation■Procedure■>■Installing■the■Mirroring■Board■or■Encryption■Board
Installation■>■[TYPE-5]■2■Option■HDDs■(250GB)■+■HDD■Mirroring■Kit■or■HDD■Data■Encryption■&■Mirroring■Kit■>■Installation■Procedure■>■Installing■the■Mirroring■Board■or■Encryption■Board
12)■Close■the■HDD■Lid.
13)■Place■the■Controller■Box■to■the■
original■position.
14)■Install■the■removed■cover■and■
the■cable.
•■ Rear■Cover
•■ Left■Rear■Sub■Cover
•■ Reader■Communication■Cable■
(when■reader■is■installed)
•■ Left■Rear■Cover
•■ USB■Cable■and■Control■Panel■
Communication■Cable
15)■Install■the■Main■Controller■PCB■1■to■the■host■machine.
CAUTION:
•■ Lift■the■handle,■insert■the■Main■
Controller■PCB■1■until■it■stops,■tilt■
the■grip■and■install■the■2■screws.
•■ Make■sure■to■tilt■the■grip■slowly■
on■both■sides■simultaneously.
•■ Check■that■the■Main■Controller■
PCB■1■is■installed■properly.
Grips
x2
F-9-464
16)■If■Reader■is■installed,■install■the■Reader■Power■Cable.
NOTE:
Handle■the■Reader■Power■Cable■from■the■
connector■side■and■make■a■slack■at■A■part.
Bend■the■Reader■Power■Cable■at■a■right■
angle■on■B■part.
x2
Connectors
Reader Power Cable
Cable Guide
Wire Saddles
[B]
[A]
F-9-465
17)■Install■the■Right■Rear■Cover■1.