9
9
9-183
9-183
Installation■>■[TYPE-3]■Option■HDD■(250GB)■+■Removable■HDD■Kit■>■Installation■Procedure■>■Assembling■and■Installing■the■Option■HDD
Installation■>■[TYPE-3]■Option■HDD■(250GB)■+■Removable■HDD■Kit■>■Installation■Procedure■>■Assembling■and■Installing■the■Option■HDD
14)■Install■the■removed■cover■and■the■
cable.
•■ Rear■Cover
•■ Left■Rear■Sub■Cover
•■ Reader■Communication■Cable■(when■
reader■is■installed)
•■ Left■Rear■Cover
•■ USB■Cable■and■Control■Panel■
Communication■Cable■
15)■Install■the■Main■Controller■PCB■1■to■the■host■machine.
CAUTION:
•■ Lift■the■handle,■insert■the■
Main■Controller■PCB■1■until■
it■stops,■tilt■the■grip■and■
install■the■2■screws.
•■ Make■sure■to■tilt■the■grip■
slowly■on■both■sides■
simultaneously.
•■ Check■that■the■Main■
Controller■PCB■1■is■
installed■properly.
Grips
x2
F-9-379
16)■If■Reader■is■installed,■install■the■Reader■Power■Cable.
NOTE:
Handle■the■Reader■Power■Cable■from■the■
connector■side■and■make■a■slack■at■A■part.
Bend■the■Reader■Power■Cable■at■a■right■
angle■on■B■part.
x2
Connectors
Reader Power Cable
Cable Guide
Wire Saddles
[B]
[A]
F-9-380
17)■Install■the■Right■Rear■Cover■1.■
18)■Close■the■Right■Rear■Cover■1,■Right■Lower■
Cover,■and■Right■Upper■Cover.■