Canon IMAGERUNNER ADVANCE C5030, Service Manual, Page: 399 / 1455

4
4
4-133
4-133
Parts Replacement and Cleaning > Image Formation System > Removing the Hopper (M) > Procedure
Parts Replacement and Cleaning > Image Formation System > Removing the Hopper (M) > Procedure
Removing the Hopper (M)
■ Preparations
1) Release the lock of Toner Container. (By service mode)
2) Open the Front Cover, the Right Lower Cover and Right Upper Cover.
3) Remove the ITB Unit.
4) Remove the Process Unit.
5) Remove the Color Drum Heater. (When the option is installed)
6) Remove the Toner Container Front Inner Cover.
■ Procedure
1) Remove the Toner Tray.
• 1 screw (M4 binding)
2) While avoiding the duct sheet, remove the Hopper Unit.
• 1 connector
• 1 wire saddle
• 5 screws (RS)
Wire saddle
Connector
x3
x2
Duct sheet
Hopper Unit
F-4-238
F-4-239
CAUTION:
If it is placed sideways, toner may scatter inside the Hopper and it may cause the
operation failure. Thus, stand and put the Hopper Unit on the paper.
Paper
F-4-240
CAUTION:
When installing the Hopper, align the cut-off [A] part of Bottle Fixing Ring with the Bottle
Fixing Arm [B] and install it to the host machine.
[A]
[B]
F-4-241