
9
9
9-101
9-101
Installation■>■Card■Reader-C1/Copy■Card■Reader-F1■>■Installation■Procedure
Installation■>■Card■Reader-C1/Copy■Card■Reader-F1■>■Installation■Procedure
13)■Install■the■Main■Controller■PCB■1■to■the■host■machine.
CAUTION:
•■ Lift■the■handle,■insert■the■Main■Controller■PCB■1■until■it■
stops,■tilt■the■grip■and■install■the■2■screws.
•■ Make■sure■to■tilt■the■grip■slowly■on■both■sides■
simultaneously.
•■ Check■that■the■Main■Controller■PCB■1■is■installed■properly.■■
Grips
x2
F-9-209
14)■Install■the■USB■Cable■and■the■Control■Panel■Communication■Cable.
15)■When■the■Reader■is■installed,■install■the■Reader■Power■Cable..
NOTE:■
Handle■the■Reader■Power■Cable■from■the■connector■side■and■
make■a■slack■at■A■part.
Bend■the■Reader■Power■Cable■at■a■right■angle■on■B■part.■
x2
Connectors
Reader Power Cable
Cable Guide
Wire Saddles
[B]
[A]
F-9-210