8
8
8-180
8-180
Service Mode > COPIER > OPTION > NETWORK
Service Mode > COPIER > OPTION > NETWORK
COPIER > OPTION > NETWORK
WOLTRANS
Setting of sleep recovery protocol
Lv.1 Details
To set the protocol for recovery from sleep mode according to the
value of WOL (Wake On LAN) trans.
Reception of a specific network packet is one of the requirements for
the device to recover from sleep mode.
When the number of network protocols supported by the device
increases, the types of network packets which activate recovery from
sleep mode vary. However, there is a possibility that the existing
network protocol is actually used.
Select the type of network packet which activates recovery from
sleep mode according to the environment where the device is used.
Use case
When selecting protocol for sleep recovery
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
1 to 3
1: WSD and SNMP, 2: WSD and CPCA, 3: CPCA and SNMP
Default value
1
802XTOUT
Set of IEEE802.1X authentication timeout
Lv.1 Details
To set timeout value for IEEE802.1X authentication.
If the device executes 802.1X authentication, change the wait time
for response from the authentication server.
Use case
When response from the authentication server is slow/fast
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
10 to 120
Unit
sec
Default value
30
IKERETRY
Setting of IKE retry times
Lv.1 Details
To set the number of retries in the case of no response from the
communication target at the time of IKE packet transmission.
Use case
Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 3
Default value
1
SPDALDEL
Initialization of SPD value
Lv.2 Details
To initialize all the SPD values that are under management.
SPD values can be initialized without clearing SRAM.
Use case
At the time of SPD value mismatch when IPSec Board is added
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 1
0: OFF, 1: ON
Default value
0
COPIER > OPTION > NETWORK
NCONF-SW
ON/OFF of Network Configurator function
Lv.1 Details
To set ON/OFF of Network Configurator function.
If the user does not use the function, select OFF to prevent remote
attack through network.
Use case
Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 1
0: OFF, 1: ON
Default value
1
IKEINTVL
Setting of IKE retry interval
Lv.1 Details
To set retry interval in the case of no response from the
communication target at the time of IKE packet transmission.
Use case
Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
1 to 10
Unit
sec
Default value
5
IPSDEBLV
Setting of IPSec debug level
Lv.2 Details
For R&D use
Use case
For R&D use
Adj/set/operate method For R&D use
Display/adj/set range
For R&D use
SP-LINK
Mode setting at 1W sleep
Lv.1 Details
To set the mode to shift to sleep mode
When 0 is set, 10base-T standby is executed, therefore standby
power 1W is realized in sleep mode.
When 1 is set, like existing models, the machine enters sleep mode
after negotiation.
Use case
When shifting to sleep mode after negotiation
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 1
0: Shift to sleep mode with 10base-T
1: Shift to sleep mode after negotiation
Default value
0
AFS-JOB
Set of FAX server job reception port
Lv.1 Details
To set the reception port of the fax server to which a fax client sends
jobs.
Use case
When changing the job reception port of the fax server
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 65535
Default value
20317
Related service mode
COPIER> OPTION> NETWORK> AFC-EVNT