Canon IMAGERUNNER ADVANCE C5030, Service Manual, Page: 397 / 1455

4
4
4-131
4-131
Parts Replacement and Cleaning > Image Formation System > Removing the Toner Container Front Inner Cover > Procedure
Parts Replacement and Cleaning > Image Formation System > Removing the Toner Container Front Inner Cover > Procedure
Removing the Toner Container Front Inner Cover
■ Preparations
1) Open the Toner Replacement Cover.
2) Execute the service mode and release the lock of Toner Container.
NOTE:
To release the lock of Toner Container manually, refer to the step 1) to 4) in “Removing
the Toner Container manually”. At that time, do not pull out the toner container.
3) Turn OFF the power before closing the Small Cover and the Toner Replacement Cover.
4) Close the 4 Small Covers and the Toner Replacement Cover. (Same in manual operation)
5) Open the Front Cover, the Right Lower Cover and Right Upper Cover.
6) Remove the ITB Unit.
7) Remove the Process Unit.
■ Procedure
1) Remove the Front Right Cover.
• 1 rubber cap
• 1 screw (remove)
• 1 screw (loosen)
Loosen
Front right cover
Rubber cap
F-4-231
2) Remove the Small Plate.
• 1 screw (P tight)
3) Remove the Front Upper Cover.
• 1 screw (P tight)
• 1 screw (RS)
x2
F-4-232
F-4-233