9
9
9-425
9-425
Installation■>■Installation■Procedure■>■Installing■the■Main■Controller■PCB■1
Installation■>■Installation■Procedure■>■Installing■the■Main■Controller■PCB■1
Installing■the■Main■Controller■PCB■1
1)■Install■the■Main■Controller■PCB■1■to■the■host■machine.
CAUTION:■
•■ Lift■the■grip■and■insert■the■Main■Controller■PCB■1■and■then,■
after■it■stops,■tilt■■the■grip■and■install■it■with■2■screws.
•■ Make■sure■to■tilt■the■grip■slowly■on■both■sides■simultaneously.
•■ Check■that■the■Main■Controller■PCB■1■is■installed■properly.■
Grips
x2
F-9-857
2)■Install■the■USB■Cable■and■the■Control■Panel■Communication■Cable.
3)■When■the■Reader■is■installed,■install■the■Reader■Power■Cable.
NOTE:■
Handle■the■Reader■Power■Cable■from■the■
connector■side■and■make■a■slack■at■A■part.
Bend■the■Reader■Power■Cable■at■a■right■angle■on■
B■part.
x2
Connectors
Reader Power Cable
Cable Guide
Wire Saddles
[B]
[A]
F-9-858
4)■Install■the■Right■Rear■Cover■1.
5)■Close■the■Right■Lower■Cover.
6)■Close■the■Right■Upper■Cover.
7)■Connect■the■Power■Supply■Plug■to■the■wall■outlet.
8)■Open■the■switch■cover■and■turn■ON■the■Main■Power■
Switch.