8
8
8-105
8-105
Service Mode > COPIER > ADJUST > PASCAL
Service Mode > COPIER > ADJUST > PASCAL
■
PASCAL
COPIER > ADJUST > PASCAL
OFST-P-Y
Y density adj at test print reading
Lv.1 Details
To adjust the offset of Y-color test print reading signal at auto gradation
adjustment (full adjustment).
When replacing the Reader Controller PCB/clearing RAM data, enter
the value of service label.
As the value is larger, the image after adjustment gets darker.
Use case
When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution
Do not use this at the normal service.
Display/adj/set range
-128 to 128
Default value
According to the setting at shipment
OFST-P-M
M density adj at test print reading
Lv.1 Details
To adjust the offset of M-color test print reading signal at auto
gradation adjustment (full adjustment).
When replacing the Reader Controller PCB/clearing RAM data, enter
the value of service label.
As the value is larger, the image after adjustment gets darker.
Use case
When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution
After the setting value is changed, write the changed value in the
service label.
Display/adj/set range
-128 to 128
Default value
According to the setting at shipment
OFST-P-C
C density adj at test print reading
Lv.1 Details
To adjust the offset of C-color test print reading signal at auto
gradation adjustment (full adjustment).
When replacing the Reader Controller PCB/clearing RAM data, enter
the value of service label.
As the value is larger, the image after adjustment gets darker.
Use case
When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution
After the setting value is changed, write the changed value in the
service label.
Display/adj/set range
-128 to 128
Default value
According to the setting at shipment
COPIER > ADJUST > PASCAL
OFST-P-K
Bk density adj at test print reading
Lv.1 Details
To adjust the offset of Bk-color test print reading signal at auto
gradation adjustment (full adjustment).
When replacing the Reader Controller PCB/clearing RAM data, enter
the value of service label.
As the value is larger, the image after adjustment gets darker.
Use case
When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution
After the setting value is changed, write the changed value in the
service label.
Display/adj/set range
-128 to 128
Default value
According to the setting at shipment
T-8-26