8
8
8-179
8-179
Service Mode > COPIER > OPTION > NETWORK
Service Mode > COPIER > OPTION > NETWORK
COPIER > OPTION > NETWORK
WUEV-RTR
Setting of sleep notification range
Lv.2 Details
To set the number of available routers to the target for sleep
notification.
Use case
Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution
This is active when COPIER> OPTION> NETWORK> WUEV-SW is
set to 0: Notified.
Display/adj/set range
0 to 254
Default value
3
Related service mode
COPIER> OPTION> NETWORK> WUEV-SW
WUEN-LIV
Recovery time setting after sleep notice
Lv.2 Details
To set the time from the sleep start from network without job
assignment until the mode is shifted to the sleep mode.
Use case
When setting the startup time after sleep notification
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
1 to 600
Unit
sec
Default value
15
DHCP-12
ON/OFF of DHCP-option 12 request
Lv.2 Details
To set ON/OFF of inquiry on the host name (Option 12) which uses
Option 55 of DHCP.
Selecting OFF can prevent DHCP packet from including Option 12 or
Option 81 under the packet-monitoring network environment.
Use case
Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 1
0: OFF, 1: ON
Default value
1
DHCP-81
ON/OFF IPaddress dynamic chng in DHCP-81
Lv.2 Details
To set ON/OFF for dynamic change of IP address by Option 81 of
DHCP.
Selecting OFF can prevent DHCP packet from including Option 12 or
Option 81 under the packet-monitoring network environment.
Selecting ON enables dynamic change of IP address by Option 81 of
DHCP in the case that the dynamic DNS setting is ON in user mode.
Use case
Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution
Be sure to set ON for the dynamic DNS setting in user mode to
enable dynamic change of IP address.
Display/adj/set range
0 to 1
0: OFF, 1: ON
Default value
1
COPIER > OPTION > NETWORK
IFX-CHIG
Set operation by IFAX recv e-mail text
Lv.1 Details
To set the number of characters for the IFAX received e-mail text, so
that the e-mail is not printed/forwarded when the characters in the
text is less than the number of specified characters.
This machine can output blank paper because some senders send
e-mail text consisting of linefeed codes only. In such case, specify 2
(number of characters) so that there will be no output of blank paper.
In the case of specifying any number other than 0, header/footer is
printed/forwarded in 1 sheet only if the e-mail (body) text is less than
the specified value while no TIFF file is attached.
As the value is incremented by 1, the number of target characters in
e-mail body text is increased by 1 character.
Use case
When reducing printouts of blank paper due to e-mail received by
IFAX
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution
Be sure to get approval from the user by telling that there will be no
print of e-mail (body) text if the number of characters is less than the
specified value.
Display/adj/set range
0 to 999
0: E-mail text is not ignored.
Unit
char
Default value
0
DNSTRANS
Setting of DNS transfer priority
Lv.1 Details
To set priority order of the protocol (IPv4/IPv6) to be used for DNS
query.
In the case of using both IPv6 and IPv4 while the DNS server
supports IPv4, it takes time because of timeout when executing DNS
query with priority on IPv6. The time can be shortened by placing
priority on IPv4.
Use case
When it takes time to execute DNS query with priority on IPv6
because the DNS server supports IPv4
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 1
0: IPv4, 1: IPv6
Default value
1
PROXYRES
Setting of proxy response to Windows
Lv.2 Details
To set whether to provide proxy response or return the device status
when an inquiry is received via Windows while the device is in sleep
mode.
Use case
When executing status response for query from Windows correctly
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 1
0: No proxy response, 1: Proxy response
Default value
1