8
8
8-130
8-130
Service Mode > COPIER > ADJUST > FEED-ADJ
Service Mode > COPIER > ADJUST > FEED-ADJ
COPIER > ADJUST > FEED-ADJ
ADJ-DK
Paper Deck write start pstn in horz scan
Lv.1 Details
To adjust the image write start position in the horizontal scanning
direction when feeding paper from the Paper Deck. (Paper width is
320 mm or smaller.)
As the value is incremented by 1, the margin on the left edge of
paper is increased by 0.1 mm.
+: Left margin becomes larger. (An image moves to the right.)
-: Left margin becomes smaller. (An image moves to the left.)
When replacing the DC Controller PCB/clearing RAM data, enter the
value of service label.
Use case
When replacing the DC Controller PCB/clearing RAM data
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Caution
If the paper width is larger than 320 mm, execute mechanical
adjustment.
Display/adj/set range
-50 to 50
Unit
mm
Default value
0
ADJ-C1RE
Write start pstn in horz scan: Cst1,2nd
Lv.1 Details
To adjust the image write start position on the second side in the
horizontal scanning direction when feeding paper from the Cassette
1.
As the value is incremented by 1, the margin on the left edge of
paper is increased by 0.1 mm.
+: Left margin becomes larger. (An image moves to the right.)
-: Left margin becomes smaller. (An image moves to the left.)
When replacing the DC Controller PCB/clearing RAM data, enter the
value of service label.
Use case
When replacing the DC Controller PCB/clearing RAM data
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Display/adj/set range
-55 to 55
Unit
mm
Default value
0
COPIER > ADJUST > FEED-ADJ
ADJ-C2RE
Write start pstn in horz scan: Cst2,2nd
Lv.1 Details
To adjust the image write start position on the second side in the
horizontal scanning direction when feeding paper from the Cassette
2.
As the value is incremented by 1, the margin on the left edge of
paper is increased by 0.1 mm.
+: Left margin becomes larger. (An image moves to the right.)
-: Left margin becomes smaller. (An image moves to the left.)
When replacing the DC Controller PCB/clearing RAM data, enter the
value of service label.
Use case
When replacing the DC Controller PCB/clearing RAM data
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Display/adj/set range
-55 to 55
Unit
mm
Default value
0
ADJ-C3RE
Write start pstn in horz scan: Cst3,2nd
Lv.1 Details
To adjust the image write start position on the second side in the
horizontal scanning direction when feeding paper from the Cassette
3.
As the value is incremented by 1, the margin on the left edge of
paper is increased by 0.1 mm.
+: Left margin becomes larger. (An image moves to the right.)
-: Left margin becomes smaller. (An image moves to the left.)
When replacing the DC Controller PCB/clearing RAM data, enter the
value of service label.
Use case
When replacing the DC Controller PCB/clearing RAM data
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Display/adj/set range
-55 to 55
Unit
mm
Default value
0