Canon IMAGERUNNER ADVANCE C5030, Service Manual, Page: 1212 / 1455

9
9
9-245
9-245
Installation■>■[TYPE-6]■Standard■HDD■+■HDD■Data■Encryption■&■Mirroring■Kit■>■Installing■the■LED■Board■>■Installing■the■Encryption■Board
Installation■>■[TYPE-6]■Standard■HDD■+■HDD■Data■Encryption■&■Mirroring■Kit■>■Installing■the■LED■Board■>■Installing■the■Encryption■Board
4)■Install■the■Controller■Cover.
CAUTION:
Be■sure■that■the■gaskets■on■left/right■side■of■
the■Controller■Cover■are■not■protruded.
5)■Install■the■cables■to■the■Encryption■Board.
•■ Signal■Cable■(450mm;■Red):■FK2-8435■or■A:Cont-Sig
•■ Power■Cable■(430mm):■FK2-8463■or■A:Cont-Pow
•■ LED■Cable■(1200■mm;■7-pin):■FM4-0839■or■A:LED-Sig
•■ STS■Cable■(550mm■(Light■blue);■5■Pin):■FM4-0842■or■
A:STS-Sig
CAUTION:
The■machine■can■operate■even■the■
STS■Cable■and■the■LED■Cable■are■
not■connected.■Therefore,■when■
installing■the■cables,■be■sure■that■
they■are■connected■properly.
Power Cable
Signal Cable
STS Cable
LED Cable
x4
F-9-490
6)■Fix■the■cables.
•■ 4■wire■saddles
•■ 1■edge■saddle
NOTE:
Be■sure■to■close■the■unused■
wire■saddle■[A].
Wire Saddles Wire Saddles
Edge Saddle [A]
x5
F-9-491