Canon IMAGERUNNER ADVANCE C5030, Service Manual, Page: 829 / 1455

8
8
8-129
8-129
Service Mode > COPIER > ADJUST > FEED-ADJ
Service Mode > COPIER > ADJUST > FEED-ADJ
COPIER > ADJUST > FEED-ADJ
ADJ-C2 Cassette 2 write start pstn in horz scan
Lv.1 Details To adjust the image write start position in the horizontal scanning
direction when feeding paper from the Cassette 2. (Paper width is
320 mm or smaller.)
As the value is incremented by 1, the margin on the left edge of
paper is increased by 0.1 mm.
+: Left margin becomes larger. (An image moves to the right.)
-: Left margin becomes smaller. (An image moves to the left.)
When replacing the DC Controller PCB/clearing RAM data, enter the
value of service label.
Use case When replacing the DC Controller PCB/clearing RAM data
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Caution If the paper width is larger than 320 mm, execute mechanical
adjustment.
Display/adj/set range -50 to 50
Unit mm
Default value 0
ADJ-C3 Cassette 3 write start pstn in horz scan
Lv.1 Details To adjust the image write start position in the horizontal scanning
direction when feeding paper from the Cassette 3. (Paper width is
320 mm or smaller.)
As the value is incremented by 1, the margin on the left edge of
paper is increased by 0.1 mm.
+: Left margin becomes larger. (An image moves to the right.)
-: Left margin becomes smaller. (An image moves to the left.)
When replacing the DC Controller PCB/clearing RAM data, enter the
value of service label.
Use case When replacing the DC Controller PCB/clearing RAM data
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Caution If the paper width is larger than 320 mm, execute mechanical
adjustment.
Display/adj/set range -50 to 50
Unit mm
Default value 0
COPIER > ADJUST > FEED-ADJ
ADJ-C4 Cassette 4 write start pstn in horz scan
Lv.1 Details To adjust the image write start position in the horizontal scanning
direction when feeding paper from the Cassette 4. (Paper width is
320 mm or smaller.)
As the value is incremented by 1, the margin on the left edge of
paper is increased by 0.1 mm.
+: Left margin becomes larger. (An image moves to the right.)
-: Left margin becomes smaller. (An image moves to the left.)
When replacing the DC Controller PCB/clearing RAM data, enter the
value of service label.
Use case When replacing the DC Controller PCB/clearing RAM data
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Caution If the paper width is larger than 320 mm, execute mechanical
adjustment.
Display/adj/set range -50 to 50
Unit mm
Default value 0
ADJ-MF Write start pstn in horz scan: MP tray
Lv.1 Details To adjust the image write start position in the horizontal scanning
direction when feeding paper from the Multi-purpose Tray. (Paper
width is 320 mm or smaller.)
As the value is incremented by 1, the margin on the left edge of
paper is increased by 0.1 mm.
+: Left margin becomes larger. (An image moves to the right.)
-: Left margin becomes smaller. (An image moves to the left.)
When replacing the DC Controller PCB/clearing RAM data, enter the
value of service label.
Use case When replacing the DC Controller PCB/clearing RAM data
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Caution If the paper width is larger than 320 mm, execute mechanical
adjustment.
Display/adj/set range -50 to 50
Unit mm
Default value 0