8
8
8-151
8-151
Service Mode > COPIER > FUNCTION > CLEAR
Service Mode > COPIER > FUNCTION > CLEAR
COPIER > FUNCTION > CLEAR
CARD
Clear of card ID-related data
Lv.1 Details
To clear the data related to the card ID (department).
Use case
When clearing the data related to the card ID
Adj/set/operate method 1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution
The data is cleared after the main power switch is turned OFF/ON.
Display/adj/set range
During operation: ACTIVE, When operation finished normally: OK!
CA-KEY
Deletion of CA certificate and key pair
Lv.2 Details
To simultaneously delete the CA certificate and key pair which are
additionally registered by the user.
Use case
When a service person replaces/discards the device
Adj/set/operate method 1) Select the item, and then press OK key.
2) Check that OK is displayed.
3) Turn OFF/ON the main power switch.
Caution
- Unless this item is executed at the time of replacement/discard
of the device, the CA certificate and key pair which are additionally
registered by the user remain in the HDD, which is a problem in
terms of security.
- Do not execute this item carelessly because the CA certificate
and key pair which are additionally registered are deleted. If they
are deleted mistakenly, they need to be again registered by the
user. If no CA certificate and key pair are additionally registered,
the machine condition becomes the same as the one at the time of
factory shipment.
- When NG is displayed in 2), there is a possibility that deletion was
not executed. In this case, surely execute the deletion by initializing
the HDD, etc.
Display/adj/set range
At normal termination: OK, At abnormal termination: NG
ERDS-DAT
Initialization of E-RDS SRAM data
Lv.1 Details
To initialize the SCM value of the Embedded-RDS stored in the
SRAM. SCM values are ON/OFF of E-RDS, server’s port number,
server’s SOAP URL, and communication schedule with the server
(how often the data is acquired), etc.
The value set by COPIER> FUNCTION> INSTALL> E-RDS, RGW-
PORT, RGW-ADR, COM-LOG is cleared.
Use case
When clearing the setting values of RGW-PORT, RGW-ADR, and
COM-LOG
Adj/set/operate method Select the item, and then press OK key.
Caution
The method of using the SRAM in E-RDS differs depending on the
Bootable version. Therefore, unless the SRAM data is cleared at the
time of version upgrade, data inconsistency occurs.
Display/adj/set range
At normal termination: OK, At abnormal termination: NG
Related service mode
COPIER> FUNCTION> INSTALL> E-RDS, RGW-PORT, RGW-ADR,
COM-LOG
COPIER > FUNCTION > CLEAR
KEY-CLR
Encrypt key clear of HDD Encrypt Board
Lv.2 Details
To clear the encryption key of the HDD Encryption Board (Security
Kit) for replacement.
Processing is executed at the time of installation of the Encryption
Board, and a new encryption key is generated.
Use case
When replacing the encryption key for the HDD Encryption Board
Adj/set/operate method 1) Select the item, and then press OK key.
2) Check that OK is displayed.
3) Turn OFF/ON the main power switch.
Caution
Since all data in the HDD becomes unavailable when executing this
item, be sure to initialize the HDD after turning OFF/ON the main
power switch.
Display/adj/set range
At normal termination: OK, At abnormal termination: NG
REG-CLR
Clear of image position correction value
Lv.2 Details
To clear the correction value when the value which is adjusted by
image position correction control is erratic value for any cause.
When color displacement is not corrected by image position
correction control, clear the correction value once. Then, either turn
OFF/ON the power or execute the quick adjustment in user mode so
that image position correction control is performed again.
If correction error occurs in diagonal direction, use this item in
conjunction with COPIER> FUNCTION> LASER> LD-ADJ-Y, LD-
ADJ-M, LD-ADJ-C.
Use case
- When color displacement cannot be corrected by image position
correction control
- When correction error occurs in diagonal direction
Adj/set/operate method Select the item, and then press OK key.
Display/adj/set range
None
Related service mode
COPIER> FUNCTION> LASER> LD-ADJ-Y, LD-ADJ-M, LD-ADJ-C,
LD-ADJ-K
USBM-CLR
Initialize USB MEAP priority rgst info
Lv.1 Details
To initialize the registered ID data retained in the OS field by calling
the API provided by the OS.
Use case
When a failure occurs in USB MEAP priority registration
Adj/set/operate method Select the item, and then press OK key.