manualshive.com logo in svg

Canon imageCLASS MF269dw, User Manual

Share
Download
Canon imageCLASS MF269dw User Manual Download Page 514

●

Check the SMTP server name, and correct the setting.

Configuring Basic E-Mail Settings(P. 79) 
Configuring E-Mail Communication Settings(P. 82) 

E-mail sending was impossible because an incorrect domain name was set.

●

Check the domain name, and correct the setting.

Configuring DNS(P. 57) 

E-mail sending was impossible because the machine was not connected to a network correctly.

●

Check whether the machine is properly installed and correctly connected to the network.

Installation/Settings Problems(P. 468) 

#753

Scanned data could not be sent as e-mail or stored in the shared folder because the LAN cable is

disconnected.

●

Check whether the LAN cable is connected correctly.

Connecting to a Wired LAN(P. 17) 

#755

Scanned data could not be sent as e-mail or stored in the shared folder because TCP/IP was not working

correctly.

●

Check <TCP/IP Settings>, and set correctly.

<Network Settings>(P. 362) 

An IP address is not set.

●

Set the IP address correctly.

Setting IP Addresses(P. 31) 

The machine cannot communicate with devices on a network immediately after the machine starts up

because the waiting time for the start of the communication is set.

●

The  machine  cannot  start  communicating  immediately  after  it  is  turned  ON.  Wait  until  the  set  time  for
<Waiting Time for Connection at Startup> passes after turning ON the machine, and send again.

Setting a Wait Time for Connecting to a Network(P. 56) 

#801

When communicating with an SMTP server to send an e-mail, a timeout error occurred from the server.

●

Check whether SMTP is running on the network correctly.

●

Check whether the machine is properly installed and correctly connected to the network.

Installation/Settings Problems(P. 468) 

When communicating with the SMTP server, an error returned from the server.

●

Check whether the SMTP server is set correctly.

A destination is not set correctly.

Troubleshooting

507

Summary of Contents for imageCLASS MF269dw





























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands