CAUTION
In case of non-compliance with this safety instruction, minor or moderate
injury can occur.
NOTICE
In case of non-compliance with this safety instruction, property damage can
occur.
2.3
General Information
2.3.1
Using the Safety Instructions and Passing Them on to Others
Do not attempt to install and operate the electric components of the drive and
control system without first reading all documentation provided with the
product. Read and understand these safety instructions and all user
documentation prior to working with these components. If you do not have
the user documentation for the components, contact your responsible Bosch
Rexroth sales partner. Ask for these documents to be sent immediately to the
person or persons responsible for the safe operation of the components.
If the component is resold, rented and/or passed on to others in any other
form, these safety instructions must be delivered with the component in the
official language of the user´s country.
Improper use of these components, failure to
follow the safety instructions in this document
or tampering with the product, including
disabling of safety devices, can result in
property damage, injury, electric shock or
even death.
WARNING
Observe the safety instructions!
2.3.2
Requirements for Safe Use
Read the following instructions before initial commissioning of the electric
components of the drive and control system in order to eliminate the risk of
injury and/or property damage. You must follow these safety instructions.
●
Bosch Rexroth is not liable for damages resulting from failure to observe
the safety instructions.
●
Read the operating, maintenance and safety instructions in your
language before commissioning. If you find that you cannot completely
understand the application documentation in the available language,
please ask your supplier to clarify.
●
Proper and correct transport, storage, mounting and installation, as well
as care in operation and maintenance, are prerequisites for optimal and
safe operation of the component.
●
Only qualified persons may work with components of the drive and
control system or within its proximity.
NYCe 4000 Multi-axis motion control system Hardware Sys‐
tem Manual
9/233
Safety Instructions for Electric Drives and Controls
R911337671_Edition 18 Bosch Rexroth AG
