Belarus 3522.5, Operator'S Manual

Page: 269 / 340

3522.5-0000010 OM
270
6.4 Scheduled maintenance servicing operations
6.4.1 Maintenance on a shift basis (SBMS) in every 8 – 10 hours of operation
or per shift
6.4.1.1 General guidelines
Every 8 – 10 hours of the tractor operation or at the end of a shift (whichever comes
first) perform the following operations:
6.4.1.2 Task 1. Check of oil level in the transmission line
Check oil level in the transmission line by means of a probe 1 (Figure 6.1.4) which
is located on the rear axis housing 2 on the left side. Oil level shall stay between the probe
marks. When necessary turn off a cap 5 and refill the oil up to the required level through
the filler neck 4.
1 – probe; 2 – rear axis housing (left-side view); 3 – rear axis housing (right-side
view); 4 – filler neck; 5 – cap;
Figure 6.4.1 – Check of oil level in the transmission line
6.4.1.3 Task 2. Check of oil level in the HLL and HSC integrated tank
Before checking the oil level set the tractor on the flat horizontal ground. Stop the
engine and put the parking brakes on.
Carry out visual inspection of the oil level according to the oil-level gauge 2 (Figure
6.4.2) on the tank. Level shall be between marks “O” and “
П
” of the oil level gauge. When
necessary refill the oil up to the “
П
” mark through an oil filler opening, for which turn off the
plug 1.
1 – oil filler plug; 2 – oil-level gauge; 3 – drain plug; 4 – intake filter.
Figure 6.4.2 – Check of oil level and change of oil in the HLL and HSC integrated tank
ATTENTION: OIL LEVEL CHECKING OPERATIONS IN THE HYDRAULIC LIFT
LINKAGE TANK SHALL BE CARRIED OUT ONLY WITH THE RETRACTED ROD OF FLL,
RLL HYDRAULIC CYLINDERS, AND CYLINDERS OF THE IMPLEMENTS COUPLED
WITH THE TRACTOR!
https://tractormanualz.com/