Belarus 3522.5, Operator'S Manual

Page: 251 / 340

3522.5-0000010 OM
252
Major characteristics of tractor “BELARUS-3522.5” HLL for working attachments
drive of other components of the hydraulically operated implements and units coupled are
shown in Table 5.6.
Table.5.6 – Major characteristics of tractor hydraulic drive “BELARUS-3522.5”
Parameter Description
Parameter
Value (characteristic)
Front Rear
1 Paired hydraulic outputs (free)
One pair
1)
(dupli-
cated with rear out-
puts)
Four pairs
2)
2 Oil drain line for hydromotors (free drain
line)
One item
1)
One item
2)
3 Total oil consumption through hydraulic
outputs, l/min
From 0 to 120,0,
steplessly variable
4 Oil consumption per one hydraulic output,
l/min
From 0 to 80,0,
steplessly variable
5 Rated minimum diameter of oil pipeline,
mm:
- oil pressure pipeline
- oil drain pipeline
- free-drain
12,0
16,0
18,0
6 Hydraulic system working pressure, MPa 16,0
7 Pressure relief cracking pressure, MPa
From 20,0 to 21,0
8 Allowable extraction of hydraulic fluid from
a tank, l, not more than 30,0
9 Allowable hydrostatic power take-off
(GSPTO) kW, not more than 20,0
10 Coupling thread of fast-coupling joint
sleeves, mm:
- oil pressure pipeline and oil drain pipeline
- free-drain oil pipeline
М
20
´
1,5
М
24
´
1,5
________________________________________________________________________________________________________________________________
1)
Refers to front outputs.
2)
Refers to rear outputs.
ATTENTION: INSTALLATION OF ADDITIONAL COMPONENTS AND CHANGE
OF HYDRAULIK LIFT LINKAGE PIPELINES ROUTE IS ALLOWED ONLY AFTER CON-
SULTATION WITH THE PLANT OR THE DEALER!
Note – Scheme of connection of hydraulic lift linkage outputs to an external con-
suming system is shown in Figure 2.16.2.
https://tractormanualz.com/