Belarus 3522.5, Operator'S Manual

Page: 28 / 340

3522.5-0000010
РЭ
29
The
windscreen wiper is activated by means of moving the underwheel switch lever
3 (fig. 2.2.1) from "off" position (“0” position according to fig. 2.2.4) into “a” position (low
speed) or (high speed). All positions are fixed.
The windscreen washer is activated (in a non-fixed position) by moving the switch
lever upward from any of three positions of the switch.
Figure 2.2.4 – Operational scheme of the right multifunctional underwheel switch
Pressing the emergency flashing button 4 (fig. 2.2.1) activates the emergency flash-
ing. A pilot lamp, built in the button, flashes simultaneously with the emergency flashing
lights. Repeated pressing the button 4 deactivates the emergency flashing.
The central light switch 5 (fig.2.2.1) has three positions:
- position “I” – “off” (the upper part of the button is pressed as in fig 2.2.1);
- position ”II” – “front and rear parking lights, license plate lights, lighting of instruments on
the dashboard and also parking lights on a trailed implement are on” (middle position);
- position “III” – “all consumers of “II” position and road headlights are on” (lower part of
the button is pressed against the stop as in fig. 2.2.1)
When pressing the button of front working lights 6 (fig. 2.2.1) two front working
lights, located on front light brackets, are actuated together with a light indicator, built in
the button.
Pressing the button (non-fixed position) of the accumulator battery remote discon-
nect switch 7 (fig. 2.2.1) the accumulator batteries are powered, the repeated pressing de-
activates the accumulator batteries.
It is possible to activate and deactivate the accumulator battery by means of manual
accumulator battery switch. To activate and deactivate the accumulator battery it is neces-
sary to press the manual AB cut-out button (non-fixed position).
2.3 Upper shield unit of button switches
Pressing the cut-out button 1 (fig 2.3.1) activates a flash beacon.
Pressing the cut-out button 2 activates two front working lights, mounted on the cab
roof, and an indicating lamp, built in the button.
Pressing the cut-out button 3 activates two rear working lights (inner) and an indi-
cating lamp, built in the button.
Pressing the cut-out button 4 activates two rear working lights (outer) and an indi-
cating lamp, built in the button.
https://tractormanualz.com/