3522.5-0000010
РЭ
195
List of programmable parameter values for tractors “BELARUS – 3522.5” (graphic
samples of displaying parameters and their values on multi-functional indicator in the pro-
gramming mode) is given in the table 3.5
Table 3.5 – List of programmable parameter values for tractors “BELARUS – 3522.5”
Parameter «Z»
Z – number of teeth of gears of final shafts of driving wheels (left
and right), above which speed sensors are mounted.
Parameter «I»
I –is a step-up index of wheel-hub drive ratio.
Parameter «R»
R – is a rear wheel rolling radius, mm. In case of reprogram-
ming this parameter may change with resolution of 5 mm.
1)
Parameter «KV2»
KV2 – is a PTO ratio.
2)
Parameter «ZV»
ZV – is a number of teeth of a washer of PTO speed sensor
----
Parameter «V»
V – is a fuel tank volume, l
3)
Also upon pressing the button “Parameter” in the programming
mode, an independent parameter “T” of the revised content of the
counter of total apparent time of engine operation is displayed in the
list of programmable parameters. This parameter is not available for
alteration, it represents a precise value (up to 1/10 of an hour) of en-
gine operation time.
________________________________________________________________________________________
1)
“985” is a value for tyres 710/70R42. If other types of tyres are mounted it is necessary to set a
value of the parameter “R”, corresponding to the rolling radius of the tyres mounted.
2)
On tractors “BELARUS – 3522.5” rear PTO speed is calculated basing on the signal from
PTO speed sensor. In this connection in parameter “KV2” is set any value except figure “000”
3)
355 l –metallic fuel tank volume;
550 l – plastic fuel tank volume.
During operation, it is permitted to vary the values of the parameter “wheel rolling radius
R”, which is determined on the basis of the tyres fitted on the tractor wheels by measuring
the distance from the wheel centre to the bearing surface.
IT IS PROHIBITED TO VARY THE ENTERED VALUES OF THE OTHER PA-
RAMETERS (FACTORY SETTINGS)!
https://tractormanualz.com/
Summary of Contents for 3522.5
