3522.5-0000010 OM
276
Contact of the pedal with the plastic skirt is not allowed. In case the contact is de-
tected adjust the pedal position (Figure 6.4.1) in compliance with subsection 3.3.4.
Figure 6.4.11
Check the clearance between a clutch release bearing and clutch release levers
fulcrum (Figures 3.3.4, 6.4.12).
Depress the pedal up to the appearance of traction between 300 and 400 N, and
hold it in the position; the pedal movement by its pad shall make from 70 to 80 mm, and
the hydraulic amplifier piston projection shall make from 5 to 6 mm (without regard to a
bevel).
If the piston projection is in excess of or less than the required value, adjust the
clutch coupling control in compliance with subsection 3.3.4.
Figure 6.4.12
Check the full stroke of the clutch pedal (Figure 3.3.4, 6.4.13).
When the pedal is fully depressed, the piston projection shall make not less than
23 mm (without regard to a bevel). If the piston projection is less than the required value,
adjust the clutch operating control in compliance with subsection 3.3.4.
ATTENTION: DECREASE OF PISTON STROKE IS ALLOWED WHEN THE
PEDAL IS FULLY DEPRESSED, IF THE CLUTCH COUPLING IS SLIPPING (TRANS-
MISSION RANGES ARE NOT SHIFTED WITHOUT SKIRR)!
https://tractormanualz.com/
Summary of Contents for 3522.5
