Parking Assist System
161
3
Detection Range
The detection range of the sensor is limited to
the vicinity of the rear bumper. Be sure to
determine the safe distance around the vehicle
and drive slowly. The maximum detection
distance of the sensor varies with the size of
obstacles. The sensor can detect fairly large
objects such as walls at a maximum distance of
150cm away. However, for small obstacles
particularly rod-shaped objects, its detection
distance is less than 150cm.
The detection range at the edge angles of the
vehicle rear is 90cm.
The detection range in the middle of the vehicle
rear is 150cm.
Warning
●
While reversing, pay particular attention
to those obstacles which are higher or lower
than the reversing sensor.
●
In certain particular situations, some
obstacles very close to the vehicle will not be
detected by the reversing radar system and
thus may cause damage to the vehicle, or to
objects such as short stumps, flower bed
edges, etc.
●
Sensor being damaged and polluted, snow
or ice covering the sensor or ultrasonic waves
generated near the vehicle (such as: by big
trucks
’
air braking or pneumatic
hammers) may all affect the normal working
of the sensor.
Reversing Rearview System*
General Instructions
The reversing rearview camera on the rear
bumpers can assist the driver in reversing or
dispatching. Vehicle rear images from rearview
camera are displayed on the screen of the
original navigation system.
Reversing rearview system is a system for
display of the rear environment while parking
the vehicle at low speed (like entering the
garage). The reversing rearview system is only a
reversing assist system. It cannot replace the
driver’s objective analysis of objects.
