A/C System
103
2
This key is used to switch over between the
single zone mode and the dual zone mode. The
system is in the single zone mode by default.
Pressing this key can switch to dual zone mode,
and the display screen will display DUAL icon.
In the single zone mode, only the set
temperature of the set side can be adjusted. In
other words, when the set temperature
increase/decrease key of the right side is
adjusted, the set temperature of the right side
will also increase/decrease; if the set
temperature of the right side is adjusted in the
single zone mode, the system will enter the dual
zone mode and the set temperature of the right
side will also change. But, the set temperature
of the left side will remain unchanged. When
the single/dual zone switchover key is pressed
under the single zone control mode, the system
will switch to the dual zone mode. In other
words, when the set temperature of the left side,
the set temperature of the right side will not
change, and vice versa. When the system is in
the automatic running mode, press down this
key and the system will remain in the automatic
running state and the AUTO icon display will
not change. When the system is in a standby
state, pressing down this key will be deemed as
an invalid command.
Interior heating
1. Turn the left\right temp. knob to above 24
℃
.
2. Select Mode switch, set airflow distribution,
blowing foot mode is recommended.
3. Turn the Air volume knob, set the amount of
air coming out.
Interior refrigeration
1.Turn the left\right temp. knob to lower than
24
℃
.
2.Press the A/C switch, start refrigeration
function, the indicator light is ON.
3.Press the Mode switch, set the airflow mode,
head blowing is recommended.
4. Press the A/C outlet airflow mode switch-3-,
set airflow mode, face direction blowing mode
is recommanded.
Fast cooling
For maximum refrigeration, all windows must
be closed. Press the A/C button, turn the mode
selection knob to head mode, turn the mixed
vent adjustment knob to the lowest temperature
point and put the air volume control knob to the
Grade 8 position.
Caution
If the temperature inside the vehicle is very
high when the engine is started, it may take
some time for the A/C to fully take effect.
Before turning on the A/C, set the fan to
maximum speed and open the vehicle
windows. Circulate air inside the vehicle for
a short period of time so as to quickly lower
the temperature inside the vehicle.
