Start and drive
137
3
Automatic transmission model:
Press the brake pedal to the bottom and hold it;
Put the shift lever in the position of P or N;
Press the start/stop button to start the engine
Tips
●
If the engine does not start successfully
within about 10 seconds, release the
start/stop button and wait 10 to 15 seconds to
repeat the normal start procedure.
●
If multiple starts are unsuccessful, please
go to Authorised dealership to check the
vehicle for troubleshooting.
Warning
●
Do not start or run the engine in a poorly
ventilated place or enclosed room.Because
the engine exhaust is colorless odorless toxic
gas, can cause coma and even asphyxiation
death.
●
Do not leave the vehicle unattended while
the engine is running.
●
Do not start the engine with a start
assist.Otherwise, explosion or high speed
engine operation may occur, causing
casualties.
●
To prevent damage to the starter, start the
engine for no more than about 10 seconds at
a time, and wait 10 to 15 seconds before
starting again.
Caution
When starting a cold engine, it takes several
seconds for the oil to reach the normal
working pressure, which may cause running
noise.
Vehicle start
Idle speed and engine coolant temperature.The
engine idle speed gradually decreases to normal
idle speed with the increase of coolant
temperature.In cold weather, it may take longer
for the engine to idle from high to low.To start
at a high idle speed, run the engine for at least
15 seconds.At the same time, release the clutch
pedal or brake pedal at a speed not too fast, in
case the vehicle suddenly forward and cause an
accident.