Exterior Maintenance
189
4
Warning
●
Be sure to use an acid-free cleaning agent
to clean the alloy wheels.
●
Do NOT use a polishing agent or other
abrasive material to treat the surfaces of the
wheels surface.
●
Any wheel with damaged surface
protective layer must be remedied in a timely
manner.
●
Using a pressure washer may cause
permanent or invisible damage to wheels,
thus causing fatal accidents.
●
Do NOT use concentrated beam washing
nozzle to clean tires! Even spraying from far
distance or in a short time, it will still cause
damage, it will still cause damage to the tires
and cause traffic accidents.
Chassis protection:
The bottom of the vehicle has undergone
protective treatment which can reduce the
degree of chemical and mechanical damage.
However, while the vehicle is running, it is
inevitable that protective layer will be damaged.
It is suggested that check the protective layers
of the vehicle bottom and the chassis before
winter or spring. Reparation should be done if
necessary. Authorized BAIC dealerships can
provide suitable repair services.
Warning
If the bottom of vehicle accidentally impacted
the road during the process of use, please
immediately go to the nearby BAIC
authorized service station for maintenance
Explanatory Notes on the Catalytic
Exhaust Purifier
Since exhaust emissions will generate high
temperature after burning, additional insulation
panel is installed in the catalytic exhaust purifier
area.
Do NOT use any other protection layer onto the
insulation panel, the catalyst or the exhaust
pipes. Do NOT remove the insulation panel.
Anti-Corrosive Treatment of
Cavities
All vehicle cavities vulnerable to corrosion have
undergone durability protection by BAIC.
Anti-corrosive treatment needs neither checks
nor follow-up treatment. If hard wax falls off
from a cavity due to high temperature outside, it
can be cleared by using a scraper or cleaning
agent.
