BAIC BJ 2021 Series Manual Download Page 245

Page: 245 / 254

Emergency Towing

243

Towing from front\

Caution

Do NOT tow the vehicle from the front when

its rear wheels are on the ground. When the

wheels are lifted, be sure to confirm that the

opposite end of the lifted side keeps a suitable

clearance off the ground. Otherwise, during

the towing the bumper or body of the towed

vehicle might be damaged.

Towing from rear

Caution

Do NOT tow the vehicle from the rear when

the front wheels are on the ground. This will

seriously damage the transmission of the

vehicle.

Using a Flatbed Truck to Drag the

Vehicle

Caution

Be sure to apply the parking brake and fix all

four wheels properly to prevent the vehicle

from moving in the event of emergency

braking.

Summary of Contents for BJ 2021 Series































































































































































































































































Search results

Summary of Contents for BJ 2021 Series

Reviews:

Related manuals for BJ 2021 Series

Brands by name

Popular brands

BAIC BJ 2021 Series, Manual

Search results

Summary of Contents for BJ 2021 Series

Reviews:

Related manuals for BJ 2021 Series

Brands by name

Popular brands