158
Brake system
3
Hill Descent Control (HDC)*
HDC enables driving at constant speed during
driving downhill.
As an additional function to ESP system, HDC
can be used when the driver hopes to maintain
constant speed (Transfer case 2H/4H, between
8km/h~35km/h; Transfer case 4L, between
4km/h~35km/h) when driving downhill.
HDC operation methods:
1. Press HDC switch to activate Hill Descent
Control function, and green HDC indicator light
will be on indicating that HDC function is
activated and ready; press HDC switch again to
shut down HDC function;
2. When HDC is on and the vehicle is driving
downhill, if the driver does not perform brake
operation or acceleration operation and the
vehicle will beis driving at speeds between
4km/h (Transfer case 4L) 8km/h (Transfer case
2H/4H) ~35km/h, HDC starts functioning and
the vehicle can remain driving at the initial
speed, and at this time, HDC indicator light is
flashing;
3. When the driver increases the speed of the
vehicle to more than 35km/h through the
accelerator pedal, HDC exits and is on standby;
when the speed keeps increasing to more than
60km/h, HDC completely exits, and HDC
indicator light is off, indicating that HDC is
switched off.
4. When the yellow HDC indicator light is on, it
is Indicates that the HDC is disabled.Please go
as soon as possible Beijing auto dealership
repair vehicles.
Roll Movement Intervention
(RMI)*
RMI is started when there is overturn potential
after lateral inclination of vehicle body or height
of the wheel above the ground exceeds a certain
limit during driving, or the steering angle
exceeds a certain limit, and it can reduce the
overturn risks by braking the wheels and
reducing the engine torque.
Autohold
The auto hold function can help driver to take
off easily on the ramp.After releasing the brake
pedal, the system continues to brake, the driver
had enough time to press the accelerator pedal
to take off, and this function ensures the takeoff
convenience at the time of automatic parking
relief.
Turn On Autohold
When the engine is operating and the driver has
fasten his seat belt, driver side door closed ,
press the AUTOHOLD switch button to activate
this function.and then the indicator lamp of
auto-hold switch button will go on.
Active Autohold
1. When the engine is operating and the driver
has fasten his seat belt, driver side door
closed,turn on AUTO HOLD ,Depress the brake
pedal until the vehicle stops,AUTO HOLD
function is working,the parking indicator lamp
on the instrument will turn green.
