96
Open and Close Doors
2
10. In the direction of the arrow as shown in the
figure, slowly put the front windshield down
and firmly fasten the front windshield to the
engine hood.
Caution
The front windshield fixing straps provided
among the accompanying tools may be used
to firmly fasten the front windshield to the
engine hood.
11. Remove B-pillar trim panel. 2
To do so, it is necessary to first remove the seat
belt height adjusters on both sides (the picture
here takes the right side of the vehicle as an
example). As shown in the figure, pry and
remove the outer housing of the seat belt height
adjuster. Tips
Unscrew the retaining bolts of the seat belt
height adjuster and then remove the seat belt
height adjuster (the picture here takes the right
side of the vehicle as an example).
Caution
A torque of 45±10Nm Is required when
reinstalling this bolt.
