196
Engine Oil
4
Adding Engine Oil
Engine oil should be added by a small amount
over several times.
1. Park the vehicle on flat pavement.
2. Open the engine hood.
3. Press the engine oil filler cover, by turning it
counterclockwise
4. To avoid adding excessive engine oil, a small
amount of engine oil should be added each time,
check the engine oil level and add oil again
depending on the oil level.
5. Once the oil level approaches the upper limit
mark, please immediately stop fueling and put
on and tighten the engine oil filler cover.
Warning
●
Before starting the maintenance, be sure to
carefully read and follow the relevant
warning instructions.
●
Engine oil is a highly inflammable
substance. While adding engine oil, be sure to
exercise care. Be careful to NOT spray
engine oil onto any engine part or the exhaust
system.
●
The engine oil filler cover must remain in a
tightened state, so as to prevent engine oil
from splashing out and causing fire when the
engine runs.
●
Be sure to use a type of engine oil that suits
the engine of the vehicle which you have
purchased.
●
If an engine oil of a specification not
suitable for the engine of this vehicle is used,
it may damage the engine and thus cause
accidents.
Caution
If the engine oil level exceeds the upper limit
mark, do not start the engine. Otherwise, it
may damage the catalytic converter and the
engine
Caution
●
Be sure to add an engine oil which is of an
SN grade or higher of the API grade system.
●
When the vehicle left the factory, superior
quality engine oil was already added to the
engine. Except in extremely cold weather,
this engine oil can be used for the whole year.
●
Engine oils of different trademarks should
not be mixed and used
