A/C System
99
2
Tips
●
When the exterior temperature and
humidity are both very high, the moisture in
the air will condense on the evaporator of the
refrigeration system and form water drops
which fall off from the evaporator, causing
water accumulation under the vehicle. This is
a normal occurrence and there is no need to
worry about it.
●
Be sure to keep the air inlet at the front
part of the windshield free of blockage by
snow, ice or tree leaves so as to ensure
normal heating and refrigeration and
prevent fogging of the front windshield.
●
Only after the vehicle windows are closed
can the A/C system play its maximum role.
However, if it is very hot inside the vehicle
due to exposure to strong sunlight, be sure to
temporarily open the vehicle windows to let
the hot air inside escape. This will speed up
cooling inside the vehicle.
A/C Control Panel
1. Left temp. knob
2. AUTO mode switch
3. Mode selection swich
4. Front defroster switch
5.Hazard waring switch
6. Fan speed knob
7. Rear defroster switch
8. Mixed vent knob
9. A/C switch
10.Right temp. Knob
When DUAL button isn’t operated, manually
operate this button, you may adjust driver and
passenger side outlet air temperature. When
DUAL button is operated, manually operate this
button, you may only adjust driver side outlet
air temperature.
The temperature
’
s control range is from LO
18.5~HI 31.5, per step of the button represents
0.5
℃ 。
Temperature changes are displayed
synchronously on the large central control
screen
Rotate the button in anticlockwise direction,
setting lower temperature. When temperature is
lower than 18.5
℃，
LO is appeared, it will start
max cooling state, Mode switch automatically
changes to face blowing mode, max air flow
rate, go on rotating in anticlockwise direction,
no change temperature.
