Open and Close Doors
91
2
Installation can be done in the reverse order of
disassembly. When installing, it should be noted
that the rear cover should be level with the car
body (or slightly lower than 1 mm).
Warning
Professional tools are needed when
disassembling and assembling the Rear top
cover. If the operation is improper, it is easy
to cause damage to vehicle parts. Or there
are unpredictable problems with
unreasonable assembly. Serious cases can
also lead to personal injury, so we strongly
recommend that you consult the authorised
dealership before doing related operations.
Front windshield overturned
Apart from the removable roof cover, the front
windshield can also be rolled forward on the
engine hatch cover to enjoy the pleasure of
driving in the field.
Caution
Front windshield can prevent the intrusion of
flying stones, branches and other objects on
the road, especially in some traffic accidents
can play a very important role in safety
protection, so when the front windshield folds
forward and overturns on the engine
compartment cover, please do not drive on
the road.
To fold the front windshield, a series of
disassembly and assembly work is needed,
during which many professional tools and parts
are used, and operators are required to have
some relevant experience. If the operation is
improper, it is easy to cause damage to vehicle
parts and even personal injury.
Warning
Therefore, we strongly recommend that you
consult Beijing Automobile Special
Distribution Store before proceeding with
relevant operations. If you want to feel the
driving feeling of the front windshield
flipping forward, please flip the front
windshield forward and fix the front
windshield firmly with the engine hatch
cover after the front windshield flipping
forward. Fasten your seat belt before driving.
When driving, it is recommended that the
speed should not exceed 16 km/h and keep
driving in low gear. Before returning to
normal driving, please restore the front
windshield to its original position and install
the components.
Warning
In the process of disassembly, each
component must be properly placed in a safe
place in order to prevent parts from being
lost or damaged, or causing danger to
personnel.
