136
Start and drive
3
Electrical anti-theft function
Electronic anti-theft function is used to prevent
others from illegally stealing vehicles.The
transceiver chip in the remote key is equipped
with an electronic code that is sent to the
vehicle.The engine can only be started if the
chip's electronic code matches the vehicle's ID
code.If you use an incorrectly coded key (or
other tool), the engine will not work.
Automatic driving lock/ stop unlock
When all the doors are locked, after unlocking
the door with the smart key, no one of the four
doors and two doors has been opened within 30
seconds, and the central door lock will
automatically lock.When the vehicle speed is
higher than the set value, the central door lock
will automatically lock all doors.When the
vehicle stalls, the doors unlock automatically.
Smart key standby starting function
If the vehicle is in a strong signal interference
area, or the battery of the intelligent remote
control key is low, when you press the start/stop
button to try to start the vehicle, the display
screen of the driving computer on the meter will
display "no intelligent key found", at this time,
the standby start function should be adopted.
Vehicle with AT
Put the gear in the "P/N" position, press the
brake pedal, put the smart key into the
designated key identification position in the cup
holder, and press the start/stop button to start the
engine.
Vehicle with MT
Put in neutral position, press the clutch pedal,
put the smart key into the designated key
identification position in the cup holder, press
the start/stop button, and start the engine.
Emergency stop function
Emergency shutdown mode can be used when
normal mode fails to shut down the engine.Step
on the brake, and press the start/stop button
twice or long press the start/stop button 2s
within 2s continuously to shut down the engine.
Start engine
Start the engine with the start/stop
button
When the intelligent key is within the effective
detection range, the starting method of the
vehicle equipped with start/stop function is as
follows:
Manual transmission model:
●
Press the clutch pedal to the bottom and hold
it;Put the shift lever in neutral position;
●
Press the start/stop button to start the engine.
