142
Start and drive
3
Warning
●
The driver must carry the remote control
key with him when he leaves the
car.Otherwise, people who stay in the car
may mistakenly start the engine or electrical
equipment, causing serious injuries.
●
Be sure to apply parking brake when
stopping.If parking, do not leave anyone in
the vehicle, otherwise it may inadvertently
remove the parking brake and cause the
vehicle to move.
●
When parking or stopping with the engine
running, be careful not to press the
accelerator pedal for too long.Otherwise, the
engine or exhaust system may overheat and
cause a fire.
●
Do not park vehicles near inflammable and
explosive objects, pay attention to the
direction of vehicles, do not make exhaust
spray to plants and damage the green belt.
Shift gear display *
On models equipped with automatic
transmissions, the shift position display in the
assembly instrument will show the current shift
position of the shift lever.
The gear character on the gear shift panel has
the function of displaying with the gear, that is,
when the gear shift lever is in a certain gear
position, the character of the gear position is
backlit and displayed.When the shift lever is in
any gear position of manual mode, M, M+ and
M- gear characters are backlit.
How to use automatic transmission
The following information is especially
important for drivers unfamiliar with vehicles
equipped with automatic transmissions.
Start the
●
The engine can only be started when the shift
lever is in "P" or "N".
●
The brake pedal should be pressed before
starting the engine.
●
When "D" or "R" is selected and the vehicle
is stationary, do not allow the engine to run at
high speed.
●
Always apply parking brake until you are
ready to drive away. Remember that once you
have selected the driving gear, the automatic
gear will slow forward or backward.
●
After selecting the driving gear and the
engine is running, do not keep the vehicle
stationary (always choose "N" if you need to
idle for a long time).
●
Vehicles in the wet slippery road, should
choose snow mode to start.Specific operation:
after the vehicle stops completely, put the gear
lever into the D gear, press the button on the
center console, enter the snow mode, step on the
accelerator slowly, and start driving.