140
Start and drive
3
Reverse gear
When the engine is running, the clutch pedal
should be pressed to the end before hanging the
reverse gear, pause for a moment and then put
the shift lever into reverse gear. Otherwise, the
gear will crash when hanging the reverse gear.
Once the gear is put into reverse gear, the
reversing indicator will be lit up, and the
instrument will issue a prompt sound.For
information on reversing radar systems, page
160, reversing radar systems.
Warning
Put the car in reverse only when it has
stopped.
Driving instruction
AT* gear instruction
●
The gear shifting control mechanism is a step
gear shifting type. According to the gear
changing prompt on the gear changing panel,
the gear shifting operation is carried out in a
specific direction.
●
Only after the vehicle is safe and stable, and
the brake to the bottom can be put into or out of
"P" gear.
●
The automatic shift control mechanism has a
P lock structure, which means that the gear can
only be moved from P when the brake pedal is
pressed down and the vehicle is powered up or
started.
"R" (reverse):
●
When the vehicle is in "R" gear, make sure
that it is completely stable. When the vehicle is
in "R" gear from "P" or "N" gear, the brake
pedal must be pressed to the bottom. When the
vehicle is in "R" gear, the reversing light will
automatically light up.
"N" (neutral):
●
Choose "N" when the vehicle is completely
stationary and the engine needs to be idling for a
short period of time, such as waiting for a traffic
signal.In neutral position, transmission is not
locked, must use parking brake or pedal.
"D" (driving gear):
●
Generally, this gear is used when the vehicle
is driving forward. The system will
automatically put into high or low gear
according to the engine load and speed.
