204
Brake Fluid
4
Warning
●
Incor r ect maintenance will r esult in
braking failure and cause injury.
●
Before adding brake fluid, be sure to clear
oil dirt and dust from the storage tank.
Contaminated brake fluid may cause braking
failure and thus serious accidents.
●
Only use the specified brake fluids. Brake
fluids of different brands contain different
additives, which may have chemical reactions
between them. Don’t mix brakefluids of
different brands.
●
The container used to store brake fluid
must be clean. Any mixture of even a minor
amount of other liquids or impurities may
cause braking failure.
●
After normal maintenance checks, the
brake fluid level should not fall fast. If it
does, immediately go to an authorized BAIC
dealership to have the vehicle checked.
Warning
Use of waste brake fluid or a brake fluid
which is not suitable for this vehicle will
greatly reduce the braking effect, or even
make the braking system lose effect.
●
The brake fluid type is marked on the
brake fluid packaging container. Only a
brake fluid which meets the correct
specification should be used.
●
Brake fluid is a toxic substance.
●
Do NOT store the brake fluid in a
container which has been used to hold food
or in a container which is not the original, so
as to prevent confusion and poisoning due to
accidental ingestion. The brake fluid must be
stored in the original sealed the container
and the container should be put in a safe
place. Be careful to prevent children from
touching it. Otherwise, they may be poisoned
Caution
The brake fluid has a corrosive effect on the
paint surface of the vehicle body. Be sure to
promptly clean brake fluid which has been
splashed onto the paint surface
Tips
Waste brake fluid must be collected and
disposed of in accordance with the
environmental protection laws and
regulations.
Warning
The brake fluid must be replaced
according to the cycle as specified in the
Warranty Manual. If the brake fluid stays in
the system for too long, air resistance will be
caused inside the pipeline of the system when
the brake is applied. This will reduce the
braking effect and driving safety, or even
cause the braking system to be completely
ineffective, thus resulting in accidents.