Brake system
159
3
2. The accelerator pedal is depressed during
take off, AUTOHOLD function is automatically
removed, and the parking indicator lamp on the
instrument will turn off.
3. If the accelerator is not pressed after 3 min,
switch to EPB mode, EPB red parking lights
point.
Turn Off Autohold
Press the "AUTOHOLD" switch from function
is off, switch indicator is off.
Autohold Is Forced To Exit
Since the driver's seat belt is unfastened, driver
side door opened and Engine shuts down, the
auto hold function will be forced to exit.
If AUTOHOLD is enabled, at the same time as
the driver's seat belt is unfastened, driver side
door opened and Engine shuts down or Press the
"AUTOHOLD" switch, the brake pedal was not
pressed down, Enter EPB mode, instrument
green indicator
Lights off, electronic parking red indicator
lights point.
Autohold Function Auto Exit
When the AUTOHOLD function is active, Put it
in D or R, the accelerator pedal is depressed,
AUTOHOLD auto exit, the vehicle will takeoff.
Caution
●
For MT vehicles,On a level road, pull in
Neutral,the accelerator pedal is
depressed,AUTOHOLD function auto
exit,Please take care of safety.
●
AUTOHOLD monitors vehicle status,If the
brake pedal is released after monitoring the
brake Insufficient pressure, ESP will be
actively pressurized Keep the vehicle
stationary. ESP actively increase Pressure
will generate noise which is the ESP
electricity pump The working sound of the
machine is normal.
●
When the instrument display prompt
"since.AUTOHOLD system failure ", said
AUTOHOLD is disabled. Please as soon as
possible Go to Beijing car dealership to
inspect and repair the car Vehicles.
