Spare Tires and Tools
229
5
As shown in the figure, first assemble the
jack-use wrench, the jack-use wrench extension
rod and the wheel assembly wrench as shown.
Use the assembled tool to turn the jack
clockwise and lift the vehicle until the leaking
tires off the ground.
Remove the wheel nuts first and then the
leaking tire. Be sure to exercise care when
touching the wheel nuts, because these nuts
could have become very hot due to vehicle
driving. Put the leaking tire on the ground, with
its outer surface facing upwards.
Caution
The lifting and follow-up replacement
procedures could only be performed after the
nuts of the wheel have been loosened.
Warning
●
The jack must be used on a hard and flat
surface.
●
The jack must be put at a suitable lifting
point. 5
●
Strictly follow the operational precautions
of the jack.
●
When a trailer is towed, the trailer must be
separated from the main vehicle.
●
While lifting, you should continuously
watch the vehicle condition. If you feel that
the vehicle body is apparently tilting, you
should stop lifting, find out what the problem
is and only resume lifting after the problem
has been fixed.