138
Start and drive
3
Shut down the engine
Stop the car, apply parking brake, put the shift
lever in neutral, automatic transmission should
be placed in P, release the brake pedal or clutch
pedal, press the start/stop button, shut off the
engine.
Put the start/stop button in "ACC" position and
the engine will stop
Caution
After a heavy load operation, it is
recommended that the engine run at idle for
a few minutes before shutting down.This
allows the cooling system to continue
working to lower the temperature of the
engine.
MT *
Press the clutch pedal to the bottom and start the
engine.Shift the transmission lever from neutral
into "1", slowly lift the clutch pedal, and the car
starts to drive
When changing gear, be sure to step on the
clutch pedal to the end, after changing to the
next gear, should slowly release the clutch
pedal.
Caution
●
Don't try to start the engine when the
transmission is in gear, because the car may
move.
●
Before starting the engine, make sure that
the shift lever is in neutral position.
●
Do not start the vehicle in a gear other
than 1st and reverse to avoid damage to the
engine, gearbox and clutch.
