Start and drive
139
3
Vehicle speed recommend
gear
speed
（
km/h
）
normal
acceleration
1 st
5-20
0-30
2 st
15-40
20-60
3 st
30-70
40-100
4 st
50
以上
70-150
5 st
70-140
—
Tips
Forced gear reduction: the vehicle speed
shall not exceed 50km/h when shifting to
second gear;The speed should not exceed
30km/h when changing gears.
Corrective operation for MT
Shift with gentle force, avoid excessive force,
prevent damage to transmission gear.
Do not put your hand on the shift lever all the
time when the car is running, to avoid premature
wear of the shift fork.
Switch from forward to reverse, or from reverse
to forward, and be sure to stop completely to
avoid damaging the transmission.
Do not use low gear for long periods of time at
high speeds, so as not to reduce engine
life.When the vehicle in a gear at a high speed,
do not force into a low gear, so as not to damage
the engine or transmission.
When slowing down or going uphill, do not
overload the engine or drive too slowly in a
certain high gear.The engine should be shifted
to a lower gear to avoid overheating.
When the vehicle is running or the engine is
idling, do not put your foot on the clutch pedal,
lest the clutch overheat or even damage.
Do not use "half clutch" method to stop the car
on the slope, so as not to damage the clutch.
When changing gears, the clutch should be fully
pressed down to avoid damage to the
transmission or clutch.
When the vehicle is stuck and needs to be hit by
forward and reverse gear rotation, the vehicle
speed should not be more than 25km/h to avoid
damage to the transmission system.
Warning
●
Don't glide downhill in neutral or turn off
the engine.When slowing down or going
uphill, do not overshoot the engine
To drive too slowly under load or in a high
gear.The engine should be shifted to a lower
gear to avoid overheating.
●
Don't drive too fast in reverse.
