Spare Tires and Tools
225
5
4. Align the center hole of the replaced wheel to
the stud in the spare wheel pit.
5. Use your hand to pre-tighten 4 nuts and then
the
3 ordinary wheel nuts with a tightening torque
should be (110±5) Nm. Finally, follow the right
angle to insert the wheel lock key into the wheel
lock nut, and tighten the lock nut with a
tightening torque of (50±5) Nm.
6. Align the spare wheel clamp with the
aluminum wheel clamp and press it with force
in the axial direction. Press all the six clamps in,
complete the assembly.
Warning
●
Do NOT use damaged spare wheels or
spare wheels which have been worn to the
maximum limit.
●
Spare tires which are more than six years
old can only be used under emergency
situations, and the vehicle must be driven
carefully.
●
After the spare tire is installed, be sure to
check tire pressure as soon as possible and
ensure that it is within the specified range.
Tips
The air pressure of the spare tires is 220kPa.
Tools
Tips
The accompanying tools of the care are
located under the rear seats.
Vehicle tools include:
1. Jack
2. Tool kit
The jack is fixed to the vehicle floor using
locking bolts, and the accompany toolkit is
located behind the jack.
