Avocent DSView 3, Installer/User Manual

Page: 342 / 384

324 DSView 3 Software Installer/User Guide
The items displayed in the content area of the DSR Remote Operations window will vary,
depending on the link selected in the side navigation bar. You may refresh any view by selecting
View - Refresh from the menu.
Servers view
Selecting Servers in the side navigation bar of the DSR Remote Operations window displays a list
of servers attached to the switch. The following items for each server will appear in the
content area:
• Name - The name of the server
• Port - The switch port to which the server is attached
• EID - The Electronic ID (EID) number of the DSRIQ module attached to the server
Table C.2 describes the icons in the Server view.
Power view
Selecting Power in the side navigation bar of the DSR Remote Operations window will display a
list of power device sockets attached to the switch and their status.
B Toolbar: Provides shortcut buttons for quickly accessing commands in the Tools menu.
C Status Bar: Displays the tips for selected menu items and the progress of operations.
D
Content Area: Use this area to display information from the DSR switch and control and start
DSView 3 software sessions to the DSR switch.
E
Side Navigation Bar: Displays the DSR switching system information you wish to access, which
displays in the Content Area.
Table C.2: DSR Remote Operations Content Area Icons (Servers View)
Icon Description
A target device that is powered up and has no established KVM Video Viewer sessions
A target device that has an active KVM Video Viewer session
A target device that is not powered up
A target device that is powered up but cannot establish a KVM connection because the path
to the target device is blocked (for example, a cascade switch has only one user port and that
port is already connected to another target device)
Table C.1: DSR Remote Operations Descriptions (Continued)