Avocent DSView 3, Installer/User Manual

Page: 156 / 384

138 DSView 3 Software Installer/User Guide
• Telnet Port - TCP port that is entered on the Telnet client to connect to this port; valid
range is 3000-5999 (6000-6063 should not be used)
6. If you made any changes, click Save and then click Close .
To change the NFS port settings on a CCM appliance SoL port:
1. In a Units View window containing appliances (see Accessing Units View windows on
page 88), click on the CCM appliance name.
2. Click Appliance Settings in the side navigation bar, click Ports and then SoL in the side
navigation bar.
3. The Appliance SoL Ports window will open. Click on an SoL port name.
4. Click NFS History File in the side navigation bar. The NFS History File window will open.
5. To enable NFS history file operations on that port, enable the Enable NFS History File
checkbox. If you enable NFS history file operations, you may optionally:
a. Enter a name in the History File field. (This name is appended to the mount point
configured for the CCM appliance to yield a full pathname.) You may use special
characters to indicate the file date; see the CCM Installer/User Guide.
b. Specify a 0-3584 byte threshold for writing of serial data in the Buffer Size field. If the
Buffer Size and Buffer Interval values are both zero, data is written immediately. If both
Buffer Size and Buffer Interval are nonzero, the first threshold that is reached will cause
the write.
c. Specify a 0-65536 second interval for writing of serial data in the Buffer Time
Interval field.
The NFS History Status area contains the current descriptive status.
6. Click Save and then click Close .
To change the port alert settings for a CCM appliance SoL port:
1. In a Units View window containing appliances (see Accessing Units View windows on
page 88), click on the CCM appliance name.
2. Click Appliance Settings in the side navigation bar, click Ports and then SoL in the side
navigation bar.
3. The Appliance SoL Ports window will open. Click on an SoL port name.
4. Click Alerts in the side navigation bar. The Port Alerts Settings window will open.
5. Add, delete or change the entries for up to ten alert strings.
6. Click Save and then click Close .
CCM appliance port groups
To display a list of CCM appliance port groups:
1. In a Units View window containing appliances (see Accessing Units View windows on
page 88), click on the CCM appliance name.